Beskrivelse
Lynx OTR 5840 Dual SDI to Fiber Optic Transceiver
Lynx OTR 5840 Dual SDI to Fiber Optic Transceiver, spesifikasjon:
Description
The OTR 5840 is a flexible dual channel SDI electrical to optical transceiver suitable for SDI/ASI-DVB video signals up to 3Gbit/s. Each channel has automatic input clock rate and signal presence detection with selectable signal reclocking. This module is ideally suited for demanding digital multi-format broadcast and professional applications.
Two input channels can be switched between optical or electrical inputs. In non-reclocked mode the module will transparently pass any data between 15Mbit/s and 3Gbit/s. Support for ASI/DVB and SMPTE 310 signals is also provided.
Select from 18 transmitter wavelengths for CWDM applications, or select dual 1310nm transmitter wavelengths for non CWDM applications.
An integral 4×4 signal router can be utilized to change 1/O channel mapping when using the LYNX control system.
Up to 10 modules (or 20 fiber RX and 20 TX channels) can be supported in a standard LYNX 2RU rack frame. The Fiber SFP sub-modules are secured on the backplane allowing for module removal and hot swapping without removing any modules rear I/O fiber connections.
NOTE: This module has advanced features and the use of APPolo control system is recommended. If installed in a RFR 5012 chassis please make sure a rack controller (RCT 5023 G) is installed in the rack.
Features
- 2 independent Fiber RX channels (1260nm – 1620nm)
- 2 Independent Fiber TX channels
- 2 channels selectable between optical or electrical inputs
- CWDM support, select from 18 wavelengths
- Supports SDI/ASI/DVB and SMPTE 310 up to 3Gbit/s
- Reclocking or non-reclocking mode for each channel
- Auto-detects input clock rate
- Transparently pass data between 15Mbit/s and 3Gbit/s in non-reclocked mode.
- Input presence detection with LED indication for each channel
- Internal 4×4 router for flexible I/O mapping (remote only)
- LC fiber connections, single mode or multimode fiber
- Fiber SFP modules secured in backplane. Module can be removed without disconnecting fiber cables
- Remote control, status monitoring and error reporting when used with LYNX control system
- SNMP error reporting when used with master controller option
- Hot Swappable
Endringer i teknisk spesifikasjon kan forekomme. Teknisk spesifikasjon fra leverandør: Lynx
Kontakt oss gjerne for spørsmål om våre produkter. Vi hjelper deg med å velge de rette tekniske løsningene for din bedrifts behov. Du kan kontakte vårt salgsteam direkte ved å sende e-post til sales@mediability.com.
Se øvrig kontaktinformasjon her.
Abonner på vårt nyhetsbrev og få tilbud og informasjon om nye produkter direkte fra oss. Registrer deg her.
