Beskrivelse
Lynx ORX 5800 Quad Fiber Optic to SDI Receiver
Lynx ORX 5800 Quad Fiber Optic to SDI Receiver, spesifikasjon:
Description
The ORX 5800 is a flexible four channel SDI optical to electrical converter for SDI/ASI-DVB video signals up to 3Gbit/s. Each channel has automatic input clock rate and signal presence detection with selectable signal reclocking. This module is ideally suited for demanding digital multi-format broadcast and professional applications.
Two of the input channels can be switched between standard electrical SDI inputs or optical inputs. In non-reclocked mode the module will transparently pass any data between 15Mbit/s and 3Gbit/s. Support for ASI/DVB and SMPTE 310 signals is also provided.
The standard mode of operation will directly map each input to its corresponding output. An integral 4×4 signal router can be utilized to change 1/O channel mapping when using the LYNX control system.
Up to 10 modules or 40 fiber RX channels can be supported in a standard LYNX 2RU rack frame. The Fiber SFP sub-modules are secured on the backplane allowing for module removal and hot swapping without removing any modules rear I/O fiber connections. Full remote control, status monitoring and error reporting is possible when using the LYNX control system.
NOTE: This module has advanced features and the use of APPolo control system is recommended. If installed in a RFR 5012 chassis please make sure a rack controller (RCT 5023 G) is installed in the rack.
Features
- Supports SDI/ASI/DVB and SMPTE 310 up to 3Gbit/s
- Selection of 18 wavelengths available for CWDM applications
- 4 independent Fiber RX channels and 4 x SDI outputs
- Supports SDI/ASI/DVB and SMPTE 310 up to 3Gbit/s
- 1260nm to 1620nm wavelength operational range
- Selectable electrical / optical inputs for 2 channels
- Reclocking or non-reclocking mode for each channel
- Auto-detects input clock rate
- Transparently pass data between 15Mbit/s and 3Gbit/s in non-reclocked mode.
- Input presence detection with LED indication for each channel
- Internal 4×4 signal router for flexible I/O mapping (remote only)
- LC fiber optic connections, single mode or multimode fiber
- Fiber SFP modules secured in backplane. Module can be removed without disconnecting the fiber cables
- Remote control, status monitoring and error reporting when used with LYNX control system
- SNMP error reporting when used with master controller option
- Hot Swappable
Endringer i teknisk spesifikasjon kan forekomme. Teknisk spesifikasjon fra leverandør: LYNX
Kontakt oss gjerne for spørsmål om våre produkter. Vi hjelper deg med å velge de rette tekniske løsningene for din bedrifts behov. Du kan kontakte vårt salgsteam direkte ved å sende e-post til sales@mediability.com.
Se øvrig kontaktinformasjon her.
Abonner på vårt nyhetsbrev og få tilbud og informasjon om nye produkter direkte fra oss. Registrer deg her.
