Beskrivelse
Libec LX-ePed
Libec LX-ePed. Electric Elevation Pedestal with Remote Control
The remote controlled LX-ePed adds the elevating element to the PTZ camera’s pan, tilt and
zoom features. This will provide more “Angles of View”, and make setup adjustments easier
in studios.
Continuous Speed Adjustment
The speed of the Upper Column is adjustable by tilting the rocker of the Controller.
The slow mode enables fine-tune settings.
Product Details
Electric pedestal with Floor Spreader for PTZ cameras.
Electric pedestal with Dolly for PTZ cameras.
Power supply adapter compatible with V-mount batteries.
Libec – News Release for New Products 2023/4
LX-ePed LX-ePed Studio
VM-12V
LX-ePed LX-ePed Studio
Payload 10kg / 22lb
Elevation 400mm
Raising/Lowering speed Approx. 14 to 40 secs. / movement
Continuous operating time 3 minutes
LAN cable for controller 30m / 98.4′
Power cable 3m / 9.8′
Power AC100V~240V
Temperature range -10°C to 40°C below RH90%
Battery-powered Optional
Camera attachment 1/4″ and 3/8″ screws
Head attachment 100mm / 75mm bowl
Accessory attachment 1/4″ and 3/8″ screw holes x 2
Bubble level Available
Weight 11.2kg / 24.6lb 14.2kg / 31.3lb
Height 95.5 to 247cm / 37.5″ to 97.2″ 106.5 to 261cm / 41.8″ to 102.7″
Section 2-Stage
Highly Reliable Wire Connection System
The LX-ePed’s Controller does not use Wi-Fi or Bluetooth, therefore users can focus on their
shoots without worrying about radio wave interreference. In addition, the Controller is PoE
powered, so there is no need to connect it to a power source or charge it as well.
・V-mount Battery Powered (optional)
By using the optional “VM-12V”, the LX-ePed can be powered by any V-mount battery.
This allows the pedestal system to be operated at any location.
Compatible with Flat-Base Equipment with a 1/4″ or a 3/8″ Screw Hole
The included “BL-F” flat-base adapter is compatible with not only PTZ cameras,
but also different types of equipment with 1/4″ and 3/8″ screw holes.
Compatible with Video Heads
By removing the “BL-F”, a 100mm ball video head can be mounted on the LX-ePed. In addition,
by using the optional “AD-75” adapter ring, a 75mm ball video head can be mounted as well.
Compact Design
The Main Unit and the Dolly/Floor Spreader, which are all foldable, can be separated from each
other for easy transportation. The compact Main Unit weighs only 10.3kg/22.7lb and can be
stored in the optional “RC-80″ tripod case.
High-Angle Shots
Dynamic high-angle shots can be achieved with the LX-ePed and the LX-ePed Studio’s
maximum heights of 247cm/97.2″ and 261cm/102.7″ respectively.
User Friendly Accessory Port
An Accessory Port, which has a 1/4″ screw hole and a 3/8” screw hole, is equipped on two of
the three sides of the tripod base.
Safety Design
With safety in mind, the electric column is carefully designed to prevent users from pinching
their fingers.
Built-in Bubble Level
A bubble level is embedded at the base of the Head Mounting Platform for easy setup.
Endringer i teknisk spesifikasjon kan forekomme.
Teknisk spesifikasjon fra leverandør: Libec
Kontakt oss gjerne for spørsmål om våre produkter. Vi hjelper deg med å velge de rette tekniske løsningene for din bedrifts behov. Du kan kontakte vårt salgsteam direkte ved å sende e-post til sales@mediability.com. Se øvrig kontaktinformasjon her.
Abonner på vårt nyhetsbrev og få tilbud og informasjon om nye produkter direkte fra oss. Registrer deg her
